THIS FIGURE TO SHOW HOW TO PLACE OBSTRUCTION LIGHT IN THE HIGH RISE STRUCTURE and IN THE PERIMETER
FAA L-810 Single Fixture Obstruction Light (Low Intensity)
Our single obstruction light with steady burning, low intensity LED light certified to FAA L-810 requirements.
The model can be used for marking obstacles which pose a threat to aircraft, such as telecommunication towers, wind turbines, buildings and other tall structures.
FEATURES
- Universal 12 – 48VDC or 110-240VAC
- Over 32.5cd
- Lightweight, corrosion resistant
- Internal diagnostic checking and alarm contact for remote monitoring
- Integrated light sensor for day/night operation
- Single LED optic
- Optional combined visual/IR for pilots using NVG
- Direct retrofit to traditional fixtures
OPTIONS
- Available with either a ¾ or 1 inch thread type
- IR LED
- Solar power configurations
- RS422/485 communications port for monitoring
___________________________________________________________________________________________________________________________________________
FAA L-864 Red LED Obstruction Light ( Medium Intensity )
Medium intensity LED obstruction light is certified to the FAA L-864 Medium Intensity Obstruction Lighting advisory circular. The light is used to mark obstacles such as telecommunication and utility towers, wind turbines, cranes, buildings and other tall structures.
Avlite’s LED obstruction lights offer an ultra bright, energy efficient and cost effective lighting solution. The light fixture is available in two configurations, universal DC (12–48VDC) or universal AC (110–240VAC). The advanced light optic uses a multiple, high intensity LEDs for efficient operation. The corrosion resistant, acrylic lens is specifically designed for use with LEDs to maximize
light intensity and uniformity.
The light fixture incorporates internal diagnostic checking and an alarm contact for remote monitoring. The alarm relay is energised in normal operation and is released if there is an LED or power fault.
FEATURES
- Cost effective, energy efficient obstruction lighting solution
- Available in universal DC: will accept between 12–48VDC
- Available in universal AC: will accept between 110–240VAC
- Alarm contact for remote monitoring
- Light sensor for day/night operation
- LED technology reduces maintenance time and costs
- Provision for external hardwire synchronisation
APPLICATIONS
- Medium Intensity Obstruction Light for marking obstacles, such as communication towers, smoke stacks, wind turbines, and other obstructions or obstacles that impact aerial navigation.
OPTIONS
- Optional solar powered configurations available
- Optional onboard GPS receiver for synchronisation
- Optional GSM monitoring
- Optional general purpose I/O with galvanic isolation
- Optional RS422/485 communications port for monitoring
- ___________________________________________________________________________________________________________________________________________
DOWNLOAD CATALOGUE PETREL WARNING LIGHT
Petrel Cat.No: 610C/XEN/24VDC/R/G,
Beacon/Warning Light, Xenon Strobe Flashing Light 50-90 fpm ,
195,000cd peak, 11 joules,
ATEX EExdeIIC/T4, Cast Alum., IP66, 24v,
Red, c/w guard, fixed strap mounting lugs
This is the category1 description.
________________________________________________________________________________________________________________
CATALOGUE KILLARK STROBE LIGHT ESX SERIES Explosionproof
HOSTILE -LITE
Class l, Div. 2, Groups A,B,C,D, Class l, Zone 2, Groups llC, llB, llA, Class ll, Div. 1&2, Groups F,G; Class lll,
CSA Enclosure Type 4X, IP66, NEMA 4X, Marine Rated
ESX Series strobe fixturescan be an excellent warning device in hazardous, hostile or wet locations
where hearing is impaired due to high ambient noise conditions.Flash rate–85 flashes per minute
Xenon type lamp
________________________________________________________________________________________________________________
CATALOGUE STROBE LIGHT KILLARK LED / XENON
These new signal luminaires can be excellent warning devices in corrosive, wet NEMA 4X harsh environments, and in hazardous locations.
NVS signals contain no exposed glass and carry Class II, F&G ratings required
for many food processing areas. Flash rate for LED is 7 micro flashes approximately every second for increased visual perception.
Xenon flash rate 60 to
________________________________________________________________________________________________________________
Hubbell Cat.No: AWSP3120,
CATALOGUE HUBBELL WARNING LIGHT SINGLE
NO FLASH Area Warning Light, Single, LED type, energy efficient (6.5 total watts per unit) , Single, Steady burn, weather/corrosion resistant housing,
Red polycarbonate lens, IP66/Nema4X, shock/
FAA AC No:150/5345-43F, 120-277vAC, threaded 1 “ bottom and side hubs
________________________________________________________________________________________________________________
Avaids Technovators Mdl: TASS-LI-INTG,
NO FLASH, Obstruction/Tower /Warning Lights, Single, LED Low Intensity, omnidirectional, Red light source, ICAO Type A/B,
Steady Burn, more than 10 CD,
bird spike top and 3/4″-14TPI threaded connection on bottom for mounting. IP65, with terminal box for 2Cx2.5mm2 cable, power supply control unit 230v imput, to 24 VDC,
built internally, and mounted with Photocell dust to dawn, ICAO/FAA compliant
________________________________________________________________________________________________________________
Avaids Technovators Mdl: TASS-LI-TWIN,
NO FLASH / FLASH OPTION, Obstruction/Tower Warning Lights, LED Low Intensity , double, Type A, static/Stationary
mode, type TASS-LI-INTG x 2 sets,
Red, Intensity of more than 32CD, set on ‘Y’ pipe type mounting with Weatherproof Control Unit to operate one unit with one on standby to start automatically in case of failure.
Power Supply 220v., 50Hz,, Inbuilt transformer, Surge protection, photocontroller, auto dust to dawn, Standby light sensor in Photo Sensor Head, for manual changeover if required,
ICAO/FAA compliant
________________________________________________________________________________________________________________
Hubbell (Dialight) Cat.No: AWDP3120
CATALOGUE HUBBELL WARNING LIGHT DOUBLE(TWIN)
NO FLASH Obstruction / Aircraft Warning Light, LED, Twin, low intensity, conforming to FAA AC No: 150/5345-43F, Red,
Stationary/Static mode, 120-277vAC, non-corrosion cast alum housing with Polycarbonate lens, consisting of two lights on a Y-mounting,
1″npt threaded hub, IP66/Nema 4X, shock/vibration resistant
________________________________________________________________________________________________________________
OL32 Solar LED Obstruction Light Airport Lighting
Acceptable for use in barricade and construction applications at Commercial Part 139 Airports under FAA AdvisorymCircular AC 150/5370-2E
(Current Edition) The Carmanah OL32 is the new benchmark for low-intensity solar
LED obstruction applications.
Benefits
Innovative design: takes advantage of the latest technical developments in optics and increased output. The OL32 also comes with the industry’s
only scalable solar engine for cost-effective and reliable performance in any location.
Industry compliant: provides ICAO Type B / FAA L810 intensities of visible light or can be switched to infrared (IR) light for night vision goggle (NVG)
operations. The OL32 is also capable of simultaneous visible/IR modes.
Installs in minutes, easily maintained: self-contained design requires no external components and supports multiple bolt patterns for simplified installation.
The light operates automatically from dusk-to-dawn and also includes an external programming switch for simplified activation and programing.
Replaceable battery pack ensures extended product life beyond five years.
Green solution: a clean renewable a energy source with recyclable batteries. RoHS compliant
 |
Number and types of lighting levels (structure height)
| H < 45m | 1 level of low intensity obstruction lights shall be used |
| 45m < H < 105m | 2 levels of obstruction lights shall be used: top level with medium intesity, intermediate with low intensity |
| 105m < H < 210m | 4 levels shall be used: top with medium intesity, 1st intermediate with low intensity, 2nd intermediate with medium intensity, lower level with low intensity |
Number of lights per level (structure width/length)
| L and W < 45m | 4 obstruction lights shall be used (one per corner) | |||||||||||||
| 45m < W < 90m | 1 additional obstruction light shall used in the middle of width W | |||||||||||||
| L and W > 90m | obstruction lights shall be spaced at longitudinal interval not exceeding 45m
THIS FIGURE TO SHOW HOW TO PLACE OBSTRUCTION LIGHT IN THE HIGH RISE STRUCTURE and IN THE PERIMETER
FAA L-810 Single Fixture Obstruction Light (Low Intensity)Our single obstruction light with steady burning, low intensity LED light certified to FAA L-810 requirements. FEATURES
OPTIONS
___________________________________________________________________________________________________________________________________________ |
|
Number and types of lighting levels (structure height)
| H < 45m | 1 level of low intensity obstruction lights shall be used |
| 45m < H < 105m | 2 levels of obstruction lights shall be used: top level with medium intesity, intermediate with low intensity |
| 105m < H < 210m | 4 levels shall be used: top with medium intesity, 1st intermediate with low intensity, 2nd intermediate with medium intensity, lower level with low intensity |
Number of lights per level (structure width/length)
| L and W < 45m | 4 obstruction lights shall be used (one per corner) |
| 45m < W < 90m | 1 additional obstruction light shall used in the middle of width W |
| L and W > 90m | obstruction lights shall be spaced at longitudinal interval not exceeding 45m |