LAMPU EXPLOSIONPROOF NEON - LAMPU EMERGENCY

Protecta III Luminaire
Ex e Fluorescent
ATEX CATEGORY 2

The Protecta III hazardous area Ex e fluorescent luminaire is designed for use in Zone 1 areas The rugged Protecta combines high quality and low maintance. It is constructed of a glass reinforced polyester (GRP) body and a polycarbonate diffuser to resist highly saline and other harsh, corrosive environments.

Major features of the luminaire are the strength of the enclosure and mounting points together wih the very high degree of ingress protection afforded by the simple reliable construction.

All the control gear is mounted on a gear tray. This ease of access to lamps and control gear ensures that installation and maintenance will be completed quickly and efficiently.

GOST R, CSA & CEPEL Approved
ATEX and IECEx Compliant
End of Life (EOL) protection to IEC 60079-7:2006 with EOL I and EOL II functionality.

Product Specifications
The following table lists all technical details associated with this particular item…

Type of Protection	Ex e mb q (Increased safety Encapsulation Powder filling)
Area Classification	Zone 1 and Zone 21
ATEX Classification	Group II Category 2 GD
IECEx	IECEx ITS 03.0005
ATEX	EC Type Examination Certificate Baseefa04ATEX0220
Coding	Ex II 2 GD Ex e mb q IIC T4 Tamb 55°C
Enclosure	GRP body with polycarbonate cover and brass suspension points
Reflector/Geartray	White polyester painted zinc coated steel
Entry	4 x M20 cable entries, 2 at each end
Termination	Quick release teminals – 3 core 4mm² max. conductor with looping and 16A rating through wiring (6mm² terminations available, contact sales)
Installation	Two M8 tapped brass inserts located on rear of body
Lampholder	G13 (Bi-pin)
Lamp Type	T8 tubular fluorescent
Control Gear	High Frequency
Relamping	Quick release diffuser clamps and hinged cover
Burning Position	Universal
Ingress Protection	IP66/67 to EN 60529 and deluge tested to DTS-01
Electrical Supply	220V-254V 50/60Hz 220V – 300V dc

ATEX Certifications
This type of certification is a European Union requirement for all electrical equipment to be used in potentially explosive atmospheres. The ATEX EC-Type Examination Certificate is issued against the Essential Health and Safety Requirements (EHSRs) given in Annex II of the ATEX directive.

These are classified into ATEX Category 3 and ATEX Category 2 products.