Explosion-Protected Light Fittingwith tapered sheet steel body
Applications:
Hazardous areas of Zones 1, 21 and 2, 22, e.g. paint shops, paint-spray linesand spray booths.
Design:
Housing: Sheet steel, powder coated in white (RAL 9016); stainless steel on request. Glass cover: Impact resistant safety glass
pane, frameless / hinged. Reflector: Hinged; white painted sheet steel; detachable. Central locking system: Operated by a 5mm allen key, hinges on the opposite side.
Isolating switch: Switching off all poles when light fitting is opened. Optical indicater showing the actual position of the switch.
Pneumatic Lamp ( Lampu Pneumatic)
Airturbo lamp from Wolf is the longest established product still in manufacture today, although it has been upgraded many times over the years. This Wind-lamp Originally used in the Coal Mining Industry to meet the rigorous requirements of underground explosion proof lighting, it is now BASEEFA certified for use in zones 1 and 2 industrial hazardous areas. Today applications are in the Oil and Petrochemicals Industries, for tank cleaning and pipeline installation inspections, offering a safer alternative to low voltage lighting in dangerously wet conditions or in flammable gases and vapours. When connected to a suitable air supply, continuous output of high quality general illumination is produced, even under water.
Fluorescent Explosionproof Light (Lampu Neon Panjang with emergency battery)
Chalmit Protecta ‘Rumah Lampu Gas Proof ‘ Protecta is constructed using glass reinforced polyester (GRP) and polycarbonate which resist saline and other corrosive environments. A key feature is the Protecta’s rugged duribility. This comes from strength of the enclosure combined with toughened mounting points together and the very high degree of IP.
The Zone 2 luminaire certified Ex n with IP66/67 sealing for ignitable gas and dust applications. The ATEX Categories are 3 G and 3 D. Lampu Explosion-Proof ‘ TL’ available at 2×18 watt, 1×36 watt, 2×36 watt
This lighting has following certificate:
GOST R, CSA & CEPEL Approved
ATEX and IECEx Compliant
End of Life (EOL) protection to IEC 60079-7:2006 with EOL I and EOL II functionality.
Jual Lampu Explosionproof
Killark (Hubbell ) ESX Series Strobe Signal Lights to be u sed as visual warning device for Explosion-proof, NEMA 4X and Marine duty are c opper-free aluminum housing with epoxy/ polyester finish High intensity strobe provides up to 200 candela with 85 flashes/ min with five different globe colors with four mounting styles
Lampu Sorot Explosion Proof(Floodlight) for Hazardous Area
There are several types of lighting produced by Killark such as V Series Lampu-sorot-explosion-proof Incandescent Fixtures
Use for task and general lighting in standard and wet locations
* Copper-free aluminum with epoxy/ polyester finish
* Compact, durable, modular design fixture
* Models for NEMA 4 and certain hazardous locations
Second one is NV Series Non-Metallic Lampu-sorot-explosion-proof Incandescent Fixtures, Use for task and general Lampu-sorot-explosion-proof lighting in corrosive environments
* Molded from 30% glass-filled thermoplastic polyester
* For wet, NEMA 4X and marine applications
As for EMI Series Floodlight Explosion Proof Incandescent Fixtures, Use where explosion-proof and NEMA 4X & Marine rated fixtures are required
* Compact in size with “ wireless design” for fast installation
* Factory sealed – no external seal needed
* Full range of accessories including exit signs and inner colored globes
The forth one is DV Series Floodlight Explosion Proof Incandescent Fixtures
Use for lighting in dust-ignition proof ( Class II Div.1) locations
Killark VQ1F/ VQ2F Series are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas and where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors and gases or combustible dusts, as defined by the NEC®
Typical .
Applications include manufacturing plants and certain chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, garages and warehouses.
Standard Materials:
• Ballast tank and splice box – corrosion resistant copper-free aluminum alloy with baked powder epoxy/ polyester finish, electrostatically applied for complete, uniform corrosion protection.
• All external hardware – 316 stainless steel.
• Guards – Painted copper-free aluminum alloy or 316SS for 7-3/ 4 ”
glass optics and Enclosed Reflectors.
• Reflectors – lightweight, corrosion r esistant fiberglass reinforced
